HYDROLINE PRODUCTS commenced operations in 1982 in Bangalore, India to manufacture Oil Hydraulic Filters and Tank / Reservoir Accessories aimed at international interchangeability for mounting interface and reliability, for Industrial & Mobile applications .Our goal is to help our OEMs / Customers and Distributors succeed with the best products engineered to add value and reliability. We consider our network of Distributors as an extension of our marketing arm and fully support their quest / activity for wider reach. We aim to be a strong player in the international market and a meaningful global player in our core products. Currently we export to over six continents. We believe in taking up challenges to offer custom engineered products. We work closely to understand the needs of customers and provide solutions tailor made to their specific requirements.
-
CUT- 7 Sizes – Flows To 270 Lpm
- Max.Working Pressure – 200 Bar
- Choice Of Cracking Pressure .35 / 3.5 Bar
- Steel Poppet type Construction
- Prevents Flow in Reverse Direction
- Suited for Mineral / Petroleum Based Oils
- Not Recommended for use to Check Reverse Flow
-
DLVT / SLVT
- Max. Operating Pressure 200 Bar
- Max Flow 30 Lpm / Temp 80° C
- Pilot Piston Ratio 1 : 4
- Sturdy Aluminium Alloy Body
- Steel Seat / Ball
-
TMH
- Tank Mounted Reusable Strainer Side Wall or Tank Top Mounting Flows to 40 Gpm ( 160 Lpm ) Stainless Steel Pleated Media 100 Mesh ( 149 Micron ) Standard Steel Hose Barb Fitting With O Ring
-
TMS
- Tank Mounted Reusable Strainer
- Side Wall or Tank Top Mounting
- Flows to 200 Gpm ( 800 Lpm )
- Stainless Steel Pleated Media
- 100 Mesh ( 149 Micron ) Standard
- M.S. / C.I. Bushing
-
SC2
- Reusable Stainless Steel 100 Mesh Standard
- Sturdy All Metal Steel Construction
- Filtration 149 Microns
- Continuous Epoxy Bond
- Max. Working Temp. 80° C.
- Suitable For Hydraulic / Mineral Oil
- Flexible Magnetic Wrap Available
-
SC3
- Reusable Ss 100 Mesh / 149 Micron Std.
- Aluminium Die Cast Nut
- Steel Cap / Support Tube
- Continuous Epoxy Bond
- Max. Working Temp. 80° C.
- Suitable For Hydraulic / Mineral Oil
- Flexible Magnetic Wrap Available
-
TMA
- Tank Mounted Reusable Strainer
- Side Wall or Tank Top Mounting
- Flows to 40 Gpm (160 Lpm )
- Stainless Steel Pleated Media
- 100 Mesh ( 149 Micron ) Standard
- Die Cast Aluminium Bushing With O Ring
-
TMSU
- Tank Mounted Reusable Strainer
- Side Wall Or Tank Top Mounting
- Flows to 40 Gpm (160 Lpm )
- Stainless Steel Pleated Media
- 100 Mesh ( 149 Micron ) Standard
- Steel Bushing With O’ Ring
-
SE
- Suitable for Hydraulic / Mineral Oil
- Consult Factory for Water Application
- Max. Working Temp. 80° C.
- Continuous Epoxy Bond
- Steel Cap / Support Tube
- Nylon Nut
- Reusable Stainless Steel 100 Mesh / 149 Micron Standard
-
LG6
- O’ Ring Type Construction / Sturdy Die Cast Cover
- 3 Sizes 3″, 5″ & 10″ Between Bolt Centres
- For Non Pressurised Tanks only
- Can Be Mounted on Tapped Holes
- Suitable for Mineral / Petroleum Based Oils
- Maximum Temperature 80° C
-
LG2
- O’ Ring Type Construction
- 3 Sizes 3″, 5″ & 10″ Between Bolt Centres
- For Non Pressurised Tanks only
- Can Be Mounted on Tapped Holes
- Suitable For Mineral / Petroleum Based Oils
- Maximum Temperature 80° C
-
SGA/S
- Shock Resistant
- Steel / Aluminium Body
- Operating Temp. 80 Deg C
- Buna – N Seal / Dowty Seal
- For Use With Mineral , & Petroleum Based Fluids
- Any Contact With Alcohol Or Solvents Must Be Avoided
-
SGP
- Shock Resistant
- Transparent Polyamide Lens
- Operating Temp. 80 Deg C
- Buna – N Seal
- For use with Mineral , Petroleum & Water Based Fluids
- Any Contact With Alcohol Or Solvents Must Be Avoided
-
RPFB
- Direct Tank Mounting
- Aluminium / Plastic Construction
- 3 Sizes Flow to 150 Lpm
- By Pass Standard 1 Bar
- Suitable for Mineral / Petroleum Based Oils
-
JFR
- Direct Tank Mounting – Flow In – to Out
- Aluiminium Die Cast Housing
- 6 Sizes – Flows to 450 Lpm
- By Pass 1 Bar (15 Psi ) Standard
- Max Temp
- Element Kit Optional
- Magnet Bank & Diffuser Tube Optional
- Working Pressure 10 Bar / Test Pressure 15 Bar / Burst Pressure 20 Bar
-
CFR
- Direct Tank or Line Mount
- 6 Sizes – Flows to 850 Lpm
- By Pass Standard 1 Bar Return / 0.35 Bar Suction
- Aluminium Diecast Construction
- Aluminium Diecast Construction
- Working Pressure to 20 Bar / Test 30 Bar / Burst 40 Bar
- Can Be Used for Return / Suction Lines
- Max Temp. to 80° C
- Suitable for Mineral / Petroleum Based Oils
-
FIF
- Direct Tank Mounting
- Pressure Max. 10 Bar / Test 20 Bar / Burst 25 Bar
- All Aluminium Die Cast Construction
- 4 Sizes – Flows to 150 Lpm
- By Pass Standard 1 Bar
- Elements Replaceble Through Cover
- Suitable For Mineral / Petroleum Based Oils
- Max Temp. 80 Deg C
-
GR / ER
- Clogging Indicator – Electrical
- Clogging Indicator – Visual
- Micro Switch Max. 3A – 250 V Ac
- Test Pressure 10 Bar
- Working Temperature to + 85° C
-
HFR
- Aluminium Die Cast Construction
- 3 Basic Models – Flows To 150 Lpm
- By Pass Standard 1 Bar
- Working Pressure To 20 Bar / Test 30 Bar / Burst 40 Bar
- Max Temp. to 80° C
- Suitable For Mineral / Petroleum Based Oils
-
IFR3
- Disposable Spin On Element
- Die Cast Aluminium Head
- 5 Sizes Flows To 200 Lpm
- Max. Pressure 10 Bar / Test 15 Bar / Burst 20 Bar
-
RPF
- Direct Tank Mounting
- Aluminium / Plastic Construction
- By Pass Standard 1 Bar
- Suitable For Mineral / Petroleum Based Oils
-
TFR3
- Disposable Spin On Element
- Die Cast Aluminium Head
- Element With By Pass Valve ( 1 Bar Standard )
- 5 Sizes – Flows To 200 Lpm
- Anti Drain Flap To Minimise Spillage While Changing Element
- For Use With Mineral / Petroleum Based Oils
-
TIF2
- Direct Tank Mounting
- Pressure – Max. 10 Bar / Test 20 Bar / Burst 25 Bar
- All Aluminium Diecast Construction
- 4 – Sizes Flows To 175 Lpm
- By Pass Standard 1 Bar
- Elements Replaceble Through Cover
- Suitable For Mineral / Petroleum Based Oils
- Max Temp. 80 Deg C
-
-
SPF
- Direct Tank Mounting
- Aluminium / Plastic Construction
- 3 Sizes Flow To 150 Lpm
- By Pass Standard 1 Bar
- Suitable For Mineral / Petroleum Based Oils
- Dimensions In Mm For Reference Only
- Max. Temp 80°C
-
IFR 4
- Disposable Spin On
- Die Cast Aluminium Head
- 9 Sizes Flows to 400 Lpm
- Max. Pressure 10 Bar / Test 15 Bar / Burst 20 Bar
- Max. Temp. 80 ° C.
- By Pass Standard 1 Bar ( Suction 0.2 Bar )
- For Use With Mineral / Petroleum Based Oils